产品详情
  • 产品名称:ZIERICK插针_插座_连接器H1-2-375-G_经销代理商

  • 产品型号:H1-2-375-G /H1-2-375-T /H1-2-500-G /H1-2-750-T
  • 产品厂商:ZIERICK
  • 产品价格:0
  • 折扣价格:0
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍:
韦德科技是ZIERICK插针_插座_连接器H1-2-375-G_经销代理商中国大陆区域的授权经销代理商。供应ZIERICK端子/接线头/连接端子/连接器/插针/插座/接线螺钉/隔离柱/防松〔锁紧,弹簧〕垫圈等电子器件。部分ZIERICK插针_插座_连接器的Part Number:H1-2-375-G /H1-2-375-T /H1-2-500-G /H1-2-750-T /H1-3-250-T /H1-3-375-T /H1-3-625-T /H1-3-750-T /H1-4-375-T /H1-4-500-14 /H1-4-500-T /H1-5-250-T /H1-5-500-14 /H1-5-500-T /H1-6-375-T /H1-6-500-T /H1-6-625-G /H1-6-750-T /H1-9-500-T /H2-3-750-T /H2-5-375-T。
详情介绍:

TECHNOLOGY OVERVIEW


ZIERICK插针_连接器H1-2-375-G_韦德科技(深圳)有限公司0755-2665 6615Zierick’s unique header assembly features capillary action to improve solder joint strength. As a result, pin retention force is 50% higher than that of J-Lead type headers. As the capillary action draws the solder, it pulls the header assembly tightly to the PCB. At the same time, co-planarity problems are eliminated because the force generated by the capillary action also pulls the header into proper position over the solder pad – even if the part has been placed off-center.

A circular solder pad on top of the board and a square solder pad on the bottom are connected to the conductive wall of the plated through hole. The size of the hole is such that it holds the square pin in place, yet leaves four cavities defined by the flat side of the pin and the curved wall of the hole. The cavities promote capillary action by drawing most of the melted solder up through the cavities where it forms a ring at the top side of the header assembly board. This solder ring is a visual indication that the reflow process is perfect and complete.

ZIERICK插针_连接器H1-2-375-G_韦德科技(深圳)有限公司0755-2665 6615Further, because the header base is made of the same material as the PCB, there are no thermally induced stresses on the solder joint – long term reliability is guaranteed. In addition, deep score lines run across both sides of the header base. The assembly is very flexible and can accommodate board warpage without weakening connections.

To meet varying application requirements, Zierick headers are available with pins missing at specified positions or with pins of different lengths and sizes. Pins are offered in brass or copper, and optional configurations are available. 


ZIERICK插针_插座_连接器H1-2-375-G

ZIERICK插针_连接器H1-2-375-G韦德科技(深圳)有限公司0755-2665 6615


ZIERICK插针_插座_连接器H1-2-375-G技术应用参数

ZIERICK插针_连接器H1-2-375-G技术应用参数-韦德科技(深圳)有限公司0755-2665 6615


FEATURES AND BENEFITS


  • Designed for demanding applications with shock, vibration, and elevated temperatures
  • Capillary Action is utilized to improve solder joint strength and pin retention force - 50% higher than J-lead headers
  • High resistance to thermal shock and thermal cycling due to material selection
  • Co-planarity problems eliminated
  • Very forgiving board placement tolerances
  • Minimal real estate required on board
  • Zierick’s Horizontal Header is easily customized for a combination of different pin lengths and missing pins for proper mating connector orientation



LOOSE NUMBER OF ROWS PINS PER ROW PIN LENGTH DIMENSIONS FINISH SPECIFICATION
H1-2-375-G 1 2 0.375" (9.53mm) Gold Plated
H1-2-375-T 1 2 0.375" (9.53mm) Tin Plated
H1-2-500-G 1 2 0.500" (12.70mm) Gold Plated
H1-2-750-T 1 2 0.750" (19.05mm) Tin Plated
H1-3-250-T 1 3 0.250" (6.35mm) Tin Plated
H1-3-375-T 1 3 0.375" (9.53mm) Tin Plated
H1-3-625-T 1 3 0.625" (15.88mm) Tin Plated
H1-3-750-T 1 3 0.750" (15.88mm) Tin Plated
H1-4-375-T 1 4 0.375" (9.53mm) Tin Plated
H1-4-500-14 1 4 0.500" (12.70mm) Gold Plated
H1-4-500-T 1 4 0.500" (12.70mm) Tin Plated
H1-5-250-T 1 5 0.250" (6.35mm) Tin Plated
H1-5-500-14 1 5 0.500" (12.70mm) Gold Plated
H1-5-500-T 1 5 0.500" (12.70mm) Tin Plated
H1-6-375-T 1 6 0.375" (9.53mm) Tin Plated
H1-6-500-T 1 6 0.500" (12.70mm) Tin Plated
H1-6-625-G 1 6 0.625" (15.88mm) Gold Plated
H1-6-750-T 1 6 0.750" (19.05mm) Tin Plated
H1-9-500-T 1 9 0.500" (12.70mm) Tin Plated
H2-3-750-T 2 3 0.750" (19.05mm) Tin Plated
H2-5-375-T 2 5 0.375" (9.53mm) Tin Plated
Pins are 0.025" (0.64mm) Square
Current Rating: 8/Pin
U.S. Patent Nos. 6,402,531 B1 and 5,816,668
Zierick recommends .006" (0.15mm) stencil thickness for most applications. For other stencil thicknesses, call Zierick's product development department.

ZIERICK插针_连接器H4-4-500-T韦德科技(深圳)有限公司0755-2665 6615

ZIERICK插针_连接器H1-3-500-T-H_韦德科技(深圳)有限公司0755-2665 6615

ZIERICK插针__连接器H1-1-500-T_韦德科技(深圳)有限公司0755-2665 6615


标题:
内容:
联系人:
联系电话:
Email:
公司名称:
联系地址:
 
 
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!